Sensor roller PD 30

Product information

  • Aluminum roller with two integrated load cells
  • For easy installation between side walls. Optionally with fastening kit for precision shoulder screws
  • Highly reliable in operation thanks to overload protection up to 10 times the nominal measuring force
  • Different roller diameters from 80 to 200 mm ensure maximum flexibility
  • For measurements in a horizontal direction, the weight of the roller does not affect the measured result
  • Good temperature behavior and a high degree of linearity of the measuring elements thanks to application of the strain gauge on a flat surface
  • The high value of the web load cell spring constant permits a high maximum operating speed for the measuring roller
Accuracy class0.5
Nominal characteristic value (sensitivity) 1 m V/V
Combined error< 0.5 %
Characteristic value tolerance 0.20%
Measuring principleFull bridge strain gauge
Nominal resistance of the strain gauge bridge700 Ohm
Bridge supply voltage
Nominal value10 V
Max. permissible value14 V
Output voltage
Nominal range0 to 10 mV (at nominal force and bridge infeed 10 V)
Max. range0 to 18 mV (at 1.8 x nominal force and bridge infeed 10 V)
Mechanical stop1.2 to 1.8 FN dep. on type
Operating load1.2 to 1.8 FN
Limit load10 x FN"
Nominal measuring deflection0.15 to 0.25 mm depending on type
Nominal temperature range- 10 to + 60° C
Operating temperature range - 10 to + 70° C
Temperature coefficient
of characteristic value± 0.3 % / 10 K
of the zero signal± 0.3 % / 10 K
Protection classIP 54
Max. permissible axial lateral force1 x FN
Connection cable6 x 0.14 mm², 5/10 m long

Request available downloads

We will immediately send you all available documents for the components and systems.

*Required field

Order & offer

Spare parts & accessories

Contact

Write to us! We are looking forward to your message.

Salutation
*Required field