Infrared edge sensor PoE FR 54

Product information

  • Infrared edge sensor based on the principle of retroreflection
  • Measuring range ±10 mm with a resolution of 0.02 mm
  • Distance-independent edge evaluation based on parallel light beams
  • Detection of edges and threads
  • Scanning with a CCD array guarantees a stable operating point independently of the material transparency
  • Exposure controller for compensation for soiling
  • Optional integrated air purge system in case of extreme dust conditions
  • Bar display for indication of the current edge position or diagnostic information
  • PoE interface to the data network center
Measuring range±10 mm
Operating voltage, nominal valuePoE (typically 48 V)
Power consumptionmax. 2 W
Electrical connectionM 8 socket D-coded 4-pole (Ethernet PoE)
Ambient temperature+10 °C to +50 °C
Storage temperature -25 °C to +80 °C
Relative humidity15 % to 95 % (non-condensing)
Resolution0,02 mm
Linearity±0,1 mm
Thread and strip widthmin. 0,2 mm
Wavelength 850 nm
Scanning rate1 kHz
Temperature drift (typical) at a relative atmospheric humidity of 60 %Approx. 0.025 mm/K
Cable lengthmax. 100 m
Protection class with suitable connector insertedmax. IP 54
WeightApprox. 0,3 kg
Dimensions (L x W x H)105 x 50 x 40 mm
Operating pressure Min. 0.1 bar
Max. 0.2 bar
Service unit filter 5 μm
Service unit residual oil content <0.01 mg/m3
Clearing device (optional)
Operating pressuremin. 0,1 bar
max. 0,2 bar
Service unit filter 5 μm
Service unit residual oil content<0,01 mg/m³

Request available downloads

We will immediately send you all available documents for the components and systems.

*Required field

Order & offer

Spare parts & accessories

Contact

Write to us! We are looking forward to your message.

Salutation
*Required field