Automation & Vision Systems
Complexer laminating station
-
- /content/dam/erhardtandleimergmbhprogram/products---spare-parts/product-types/web-guiding/steering-roller/complexer.png
- Description
- Technical Data
- Highly accurate positioning by means of pre-positioning and final fine control
- Individually matched material infeed so that delicate rubber strips can be applied without mechanical stress
- Can be combined with cameras, laser triangulation and infrared sensors
- Integrated fieldbus interface for communication with the customer PLC
- Comprehensive control modes for highest requirements and accuracy
- Operation, service and diagnostic capability via web-based management or directly connected command station
| Positional accuracy | Up to ±0.2 mm (material and sensor-dependent) |
| Material width, master | Up to 1600 mm (larger on request) |
| Material width, slave | Up to 100 mm (depending on material thickness, larger on request) |
| Number of master webs | Up to 2 |
| Number of slave webs | Up to 2 |
| Ambient temperature | +10 °C to +50 °C |
| Storage temperature | -20 °C to +80 °C |
| Relative humidity | 15 to 95 % (non-condensing) |
| Operating voltage | |
| Nominal value | 24 V DC |
| Nominal range | 20 to 30 V DC (ripple included) |
| Nominal range with power supply | 100 to 240 V, 50/60 Hz |
| Current consumption | Max. 5,6 A DC |
| Interface | Ethernet UDP/IP, EtherNet/IP |
| Optional: Profinet and other databus systems | |
| Protection rating | IP 54 |
Loading