Spindle-type stretcher systems monitor and control the fabric tension of revolving felts. Integrated fabric tension sensors acquire the fabric tension continuously and without delay. A digital three-point controller continuously compares the actual value with the set target value and sends a correction value to the actuating drive, as necessary. The tension on the felt is increased or decreased via the spindle-type stretcher.
Area of use
The spindle-type stretcher system is used in the press section of a paper machine.
Spindle-type stretcher systems can be freely mounted in terms of position. Wrapping of 180° is desirable for the stretch roller. The adjusting plane of the spindle-type stretcher should be positioned in the bisecting line between the infeed and outfeed. Wrap angle compensation needs to be incorporated if the overall wrap around the stretch roll is smaller than 150°.