TensionMaster

Constant quality of the corrugated sheets is impossible without constant web tension. The TensionMaster system measures the web tension at the runout of the bridge, compares the results with the desired values and readjusts the web tensions automatically and continuous. This makes the premise for a constant heat transfer on the single webs in the pre-heaters.

Function

Constant quality of the corrugated sheets is impossible without constant web tension. The TENSIONMASTER system measures the web tension at the runout of the bridge, compares the results with the desired values and readjusts the web tensions automatically and continuous. This makes the premise for a constant heat transfer on the single webs in the pre-heaters.

 

Area of use

The TENSIONMASTER is used for individual web tension to a set-point value.

 
Application

In the wet-end on the corrugator bridge directly after web guiding and before the preheater.

Further product information

Function

The self-adjusting ELCORR roller compensates thickness, length and alignment differences occurring in a moving web. The operation is purely mechanical, without using air, hydraulic or electronical devices, thus, an equal cross tension distribution, heat transfer, as well as an uniform glue application is achieved.

 
Area of use

The Self-adjusting compensating roller ELCORR cares an equal web tension in cross direction on the operator- and drive side

 
Application

The idler is working in both paper running directions, upstream and downstream, and is most effective when located between machine parts like pre-heater, pre-conditioner or glue station.

 

Further product information