Web guiders are used in pairs and are set at a certain correction angle at the edge of textile webs. Each web guider has two rollers which are more or less pressed against each other to initiate a lateral correction of the web position.
Web guider KF 2020
Web guider with mechanical edge detection and pneumatic control of the nip roller.
Suitable for wovense
Web guider KF 2040
Web guider with mechanical edge detection and electro-magnetic control of the nip roller.
Suitable for wovens
Web guider KF 2060
Web guider with opto-electronic edge detection and electro-magnetic control of the nip roller.
Suitable for wovens and knits
Web edges are detected in the reflected light mode or in the light barrier mode, ambient light and color contrasts therefore do not influence web detection.
Auxiliary drive in the upper roller as an option
Web guider KF 2080
Web guider with opto-electronic wide band sensor and electro-magnetic control of the nip roller.
Suitable for wovens and knits
Auxiliary drive in the upper roller and web oscillation within the visual range of the wide band sensor as an option.
Positioning support
Positioning support for E+L web guiders and web cutters. The supports are used as mounting brackets for the equipment and facilitate their adjustment to the given web width.
Acceptable loads:
- VWG 1: up to about 25 kg per sliding bracket
- VWG 2: up to about 40 kg per sliding bracket
Web guider KF 12
Web guider with mechanical edge detection and pneumatic control of the nip roller.
Stainless steel version for an installation into steam boxes
